SPES/PVDF Binary Membrane as an Alternative Proton Exchange Membrane in Vanadium Redox Flow Battery

来源 :武汉理工大学学报(材料科学版)(英文版) | 被引量 : 0次 | 上传用户:ZYXN
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
SPES/PVDF blends were employed to prepare the ion exchange membranes for vanadium redox flow battery (VRB) application for the first time. The addition of the highly crystalline and hydrophobic PVDF effectively limited the swelling behavior of SPES. The vanadium ion permeability of SPES/PVDF membranes was one order of magnitude lower than that of Nafion117 membrane and pristine SPES membrane. Single cells with SPES/PVDF composite membranes showed significantly lower capacity loss, higher coulombic efficiency and higher energy efficiency than that with Nafion117 and pristine SPES membranes. The blend membrane with 40wt% of PVDF (denoted as S0.6P0.4) showed energy efficiency of 83.2% at 30 mA·cm-2, which was superior to that of the Nafion117 and SPES membranes. In the self-discharge test, S0.6P0.4 membrane showed twice longer duration in open circuit decay than that with Nafion117 membrane. With all the good properties and low cost, the SPES/PVDF membranes are expected to have excellent commercial prospects as ion exchange membranes for VRB system.
其他文献
The in-plane compressive characteristics of the ultra-high molecular weight polyethylene (UHMWPE) fibre (Dyneema?) reinforced composites, both in 0/90° and ±45° fibre orientations with respect to the loading direction, have been investigated. The composit
Tensile properties of epoxy casts together with shape memory alloy (SMA), glass (GF) and carbon (CF) woven fabric reinforced epoxy matrix super hybrid composites were investigated, respectively. In order to enhance the mechanical strength of this advanced
Hexagonal boron nitride ceramic (h-BN) based on the nitridation of B powders was obtained by reaction sintering method.The effects of sintering temperature on the mechanical properties and microstructure of the resultant products were investigated and the
Single-crystal Fe3O4 with monodisperse microspheres structure has been used for individual electrochemical detection of heavy metal ions. Morphology and structure of the as-prepared Fe3O4 microspheres were characterized by scanning electron microscopy (SE
Nano-NiO and bulk NiO were prepared from Ni(AC)2·4H2O by coordination precipitation using aqueous ammonia and by a solid state reaction, respectively. The nickel oxide particles were characterized by X-ray Diffraction (XRD) and scanning electron microscop
We reported the synthesis of nitrogen-doped carbon using surface-attached polyelectrolyte layers as precursors. The synthesized material has a large surface area of 800 m2·g-1 with uniformed pore distribution. Benefitfed from the high pyridinic nitrogen c
Porous Fe-Si alloys with different nominal compositions ranging from Fe-10wt% Si to Fe-50wt% Si were fabricated through a reactive synthesis of Fe and Si elemental powder mixtures. The effects of Si contents on the pore structure of porous Fe-Si alloy wer
Hydroxyl terminated polybutadiene (HTPB) based polyurethane (PU)-polystyrene (PS) interpenetrating polymer network (IPN) was prepared and characterized by FTIR, TGA, WCA, swelling experiments, and SEM. The IPN was used for pervaporation (PV) recovery of b