Exploring Heterogeneous NoC Design Space in Heterogeneous GPU-CPU Architectures

来源 :计算机科学技术学报(英文版) | 被引量 : 0次 | 上传用户:weifeng151
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Computer architecture is transiting from the multicore era into the heterogeneous era in which heterogeneous architectures use on-chip networks to access shared resources and how a network is configured will likely have a significant impact on overall performance and power consumption. Recently, heterogeneous network on chip (NoC) has been proposed not only to achieve performance comparable to that of the NoCs with buffered routers but also to reduce buffer cost and energy consumption. However, heterogeneous NoC design for heterogeneous GPU-CPU architectures has not been studied in depth. This paper first evaluates the performance and power consumption of a variety of static hot-potato based heterogeneous NoCs with different buffered and bufferless router placements, which is helpful to explore the design space for heterogeneous GPU-CPU interconnection. Then it proposes Unidirectional Flow Control (UFC), a simple credit-based flow control mechanism for heterogeneous NoC in GPU-CPU architectures to control network congestion. UFC can guarantee that there are always unoccupied entries in buffered routers to receive flits coming from adjacent bufferless routers. Our evaluations show that when compared to hot-potato routing, UFC improves performance by an average of 14.1%with energy increased by an average of 5.3%only.
其他文献
由于我国社会主义市场经济的逐渐发展,经济发展的逐渐趋于全球化。因此,对于采油厂的物资采购计划应该到达规范化的管理水平。从而改变传统的采购模式,节约采购成本,使企业的发展
304不锈钢在143℃硅油中恒载荷预蠕变足够长时间后,再在143℃ MgCl2溶液中相同恒载荷下进行应力腐蚀.结果表明,在开路条件下应力腐蚀能使表层和体内α'马氏体分别升高14%和1.5%.
目前,编外人员在文教卫生系统各级机构广泛存在,编外人员已经成为社会事业发展的重要补充力量,本文根据基层现状调查,结合人事管理工作的实践,提出现在编外人员管理存在的问题和思
将40CrMoTi钢拉伸试样空拉至塑性变形大于1%后卸载,充氢至饱和后再空拉,其屈服应力小于卸载前的流变应力,其差值就是固溶氢引起的附加拉应力,它协助外应力促进塑性变形.将不同
对晶粒组元因晶体生长时沿晶界发生旋转的铜双晶体进行了恒定塑性应变幅下的循环形变研究,塑性应变幅为1.5X10-3通过扫描电子显微镜-电子通道衬度技术(SEM-ECC)对滑移形貌和位
采用X射线衍射、透射电镜以及恢复力测量,研究了Fe-17Mn 5Si-10Cr-5Ni合金的低温松弛性能.结果表明,实验合金的低温松弛十分严重,恢复力在-60℃时较室温下松弛了57.17%.低温
利用Gleeble 1500热模拟试验机研究了Zr55Al10Ni5Cu30块状非晶合金的高温压缩断裂.在室温情况下,在块状非晶合金断面的脉纹壁上出现了带有锯齿形边缘的裂口.在高温情况下,Zr5
提出了基于图像识别技术研究有色金属大气腐蚀早期行为的方法,用扫描仪获取试样的大气腐蚀形貌图像,采用连续小波变换对图像进行分解并提取能量值作为特征信息,研究了图像特
用粉末冶金工艺制备了Sm(CobalFexCu0.088Zr0.025)7.5(x=0-0.30)烧结磁体,对Fe含量x对磁体的磁性及其高温特性的影响进行了系统研究.随Fe含量的增加,最大磁能积(BH)max和剩磁
利用渗氢后的拉伸实验,研究了氢对几种钒合金拉伸性能的影响及其氢脆断裂特性,结果表明,合金元素和氧含量均严重影响钒合金的抗氢脆能力.低氧含量V4Cr4Ti合金发生氢脆断裂的