木材表面批腻子遇到较大孔洞时,可用锯木屑加适量乳胶拌和均匀,然后,往需要的地方批,立等可干,而且坚固结实。但注意要批得比板面略凹一点,以便加批石膏腻子。不能弄到四周。如果弄到洞孔的周围,应立即将它清除,不然等它干燥后,用砂纸也难打平。 When the putty on the surface of the wood meets a larger hole, it can be mixed with sawdust and an appropriate amount of latex, and then it can be batched to the place where it is needed, and it can be solid and strong. However, attention should be paid to making it slightly more concave than the board surface so that plaster putty can be added. Can’t get around. If you get around the hole, you should immediately clear it, or wait until it is dry, it is difficult to level with sandpaper.