木工倒棱开槽刨可以合并或拆开单独使用。合并可以倒棱、裁口,一次完成,不用划深、宽线,校对后即可使用,可提高工效5～7倍。刨上装有M6螺丝杆2个,杆上装有螺丝轮。刨底有靠板,用时紧靠木材,能走直线。A为做窗用的,B为做门用的,见图1。 Woodworking chamfering slotting machines can be combined or unpacked for individual use. The merger can be chamfered, cut, and completed once, without drawing a deep, wide line, and can be used after proofreading, which can improve work efficiency by 5 to 7 times. There are two M6 screw rods on the planer, and a screw wheel is installed on the rod. There is a slat on the bottom of the planner, which is close to the wood when used and can take a straight line. A is for windows, and B is for doors. See Figure 1.