论文部分内容阅读
一套完整的音响系统设备不但非常复杂,而且很昂贵,如果使用不当,不仅得不到优良的音响效果,而且很可能损坏扬声器或扩大机。所以,正确地掌握使用方法和及时地进行设备维护是作为一个合格的音响师的必备条件。1.正确进行系统配置与连接系统的连接方式、选用的插接件型号以及接线型号规格,都应当满足规定的要求。接线正确无误,并保证接触良好,经过认真检测之后,才能进行加电调整。2.养成正确的开/关机顺序习惯原则上,开机顺序应当是先从信号源开始,逐步向后依次打开设备。即先打开传声器,DVD等音源,再打
A complete set of sound system equipment is not only very complex and expensive, if not used properly, not only does not get good sound effects, but also may damage the speaker or amplifier. Therefore, the proper use of methods and timely maintenance of equipment as a qualified sound engineer prerequisites. 1. Correct system configuration and connection system connection, the choice of connector models and wiring models specifications, should meet the requirements. Wiring is correct, and ensure good contact, after careful testing, to power adjustment. 2 to develop the correct on / off sequence Habitually In principle, the boot sequence should be from the signal source, and gradually open the device in turn. That is to open the microphone, DVD and other audio sources, then call