【摘 要】
：
Ti-Mo getters have been fabricated via metal injection molding (MIM) using three kinds of Ti powders with different mean particle sizes of 46 μm, 35 μm and 26
【机 构】
：
Institute of the Advanced Electronic Materials
论文部分内容阅读
Ti-Mo getters have been fabricated via metal injection molding (MIM) using three kinds of Ti powders with different mean particle sizes of 46 μm, 35 μm and 26 μm, respectively. The surface morphology, porosity, and hydrogen sorption properties of Ti-Mo getters formed by MIM using paraffin wax as a principal binder constituent were examined. It has been proven that the powder injection molding is a viable forming technique for porous Ti-Mo getter. The particle size of Ti powders and the powder loading influence the porosity of getters, and this affects the sorption capacity of Ti-Mo getters. Ti-Mo getters produced with the Ti powders possessing a mean particle size of 35 μm using a powder loading of 40 vol.% have a high porosity, resulting in a good sorption capacity.
其他文献
2024 aluminum matrix composites reinforced with different size AlN particles (0.5, 4 and 10 μm) were fabricated by the squeeze-casting technology. The aging be
The WC powder was precoated on the surface of CrNiMo stainless steel and then made into an alloying layer by using the laser alloying technique.Phases in the la
The superplastic behavior was studied in an Al-4Cu-1Li-0.4Mg-0.4Ag-0.1Zr alloy. The alloys were manufactured both by a conventional rolling route and a thermo-m
针对目标函数和约束条件均含区间参数的情况,在定义P-可信度指标基础上,给出问题的机会有效解及参数确定型优化命题.由此,决策者可以根据自身偏好和客观情况,通过设定确定型
对直觉模糊关系进行了再研究,提出了直觉模糊关系的核与闭包的概念,得到了直觉模糊关系的十四集定理.首先,利用直觉模糊逆自反关系、对称关系以及自反关系给出了直觉模糊关系
Three dimensional large eddy simulation (LES) is performed in the inves-tigation of stably stratified turbulence with a sharp thermal interface. Main results ar
The load balance is a critical issue of distributed Hash table (DHT), and the previous work shows that there exists O(logn) imbalance of load in Chord. The load
The effects of mixed rare earth oxides and CaCO3 on the microstructure of an in-situ Mg2Si/Al-Si hypereutectic alloy composite were investigated by optical micr