装配式工业厂房的柱子吊装以后,要做三个方面的校正,即平面位置、标高和垂直度的校正。平面位置的校正,要在柱子对位时进行。标高的校正,要在做杯形基础的杯底抄平,结合该基础预制柱的实际长度同时进行。垂直度的校正,应在柱子临时固定后进行。当测量高度超过10米柱子的垂直度 After the pillars of a prefabricated industrial plant are hoisted, there are three aspects to be corrected: correction of the plane position, elevation, and verticality. The correction of the plane position is performed when the column is aligned. The correction of the elevation is to be done on the cup bottom of the cup base, combined with the actual length of the basic precast column. The verticality correction should be performed after the column is temporarily fixed. When measuring the verticality of a column exceeding 10 meters in height