论文部分内容阅读
Synthesis of autoclaved aerated concrete(AAC) has been carried out with carbide slag addition, and the carbide slag could be used as a main material to produce the AAC with the compressive strength about 2 MPa and the density below 0.6 g?cm-3. In this study, quartz sand acted as frame structure phase in the matrix, and quartz addition also infl uenced the Si/Ca of starting material. Tobermorite and CSH gel were formed readily at 62%, which seemed to enhance the compressive strength of samples. Curing time seemed to affect the morphology of phase produced, and specimen with the plate-like tobermorite formed at 10 h appeared to have a better compressive strength development than the fiber-like one at 18 h. The higher curing temperature seemed to favor the tobermorite and CSH gel formation, which also exerted a significant effect on the strength development of the samples. On the micro-scale, the formed CSH gel was filled in the interface of the matrix, and the tobermorite appeared to grow in internal-surface of the pores and interstices. The tobermorite or/and CSH formation seemed to densify the matrix, and therefore enhanced the strength of the samples.
Synthesis of autoclaved aerated concrete (AAC) has been carried out with carbide slag addition, and the carbide slag could be used as a main material to produce the AAC with the compressive strength about 2 MPa and the density below 0.6 g? Cm-3. In this study, quartz sand acted as frame structure phase in the matrix, and quartz addition also infl uenced the Si / Ca of starting material. Tobermorite and CSH gel were formed readily at 62%, which seemed to enhance the compressive strength of samples. Curing time seemed to to the morphology of phase produced, and specimen with the plate-like tobermorite formed at 10 h to have a better compressive strength development than the fiber-like one at 18 h. The higher curing temperature seemed to favor the tobermorite and CSH gel formation, which also exerted a significant effect on the strength development of the samples. on the micro-scale, the formed CSH gel was filled in the interface of the matrix, and the tobermorite w in internal-surface of the pores and interstices. The tobermorite or / and CSH formation was to densify the matrix, and therefore enhance the strength of the samples.