论文部分内容阅读
Applicability of the following creep constitutive equations was investigated for normal type creep curves of Ni-18.5Cr alloy and tertiary creep dominant curves of Ni-18.5Cr16W alloy under constant load: the θ projection method describing a creep curse by a sum of two exponential terms, modified θ method describing a primary creep stage by an exponential term and a tertiary creep stage by a logarithmic term, modified Ω method describing a creep curve by a sum of two logarithmic term, 2θ method with only a tertiary creep component and Ω method. The θ, modified θ and modified Ω methods can describe normal type and tertiary creep dominant curves. Tertiary creep dominant curves of Ni-18.5Cr-16W alloy at 900℃ are also described using 2θ and Ω methods. Applicability of the modified θ and modified Ω methods is superior for constant load creep curves because they can predict creep curves up to rupture and rupture life accurately and conservatively.
Applicability of the following creep constitutive equations was investigated for normal type creep curves of Ni-18.5Cr alloy and tertiary creep dominant curves of Ni-18.5 Cr16W alloy under constant load: the θ projection method describing a creep curse by a sum of two exponential terms , modified θ method describing a primary creep stage by an exponential term and a tertiary creep stage by a logarithmic term, modified Ω method describing a creep curve by a sum of two logarithmic term, 2θ method with only a tertiary creep component and Ω method. The θ, modified θ and modified Ω methods can describe normal type and tertiary creep dominant curves. Tertiary creep dominant curves of Ni-18.5Cr-16W alloy at 900 ° C are also described using 2θ and Ω methods. Applicability of the modified θ and modified Ω methods is superior for constant load creep curves because they can predict creep curves up to rupture and rupture life accurately and conservatively.