本文通过对Rokop连铸机浇铸方式的分析,同其它浇铸方式的比较,及对双T形中间罐的流场分布的水模实验,指出我国所引进的采用“双钢包”浇铸方式的Rokop连铸机,由于目前不能实现双钢包同时浇铸,其中间罐温度极不均匀,影响铸坯质量和工艺操作。并提出了中间罐几何形状改进的方案。 Based on the analysis of casting method of Rokop continuous casting machine, comparison with other casting methods and water model experiment of flow field distribution of double T-shaped can, this paper points out that the Rokop with “double ladle” Caster, due to the current can not be achieved at the same time casting double ladle, the intermediate tank temperature is very uneven, affecting the quality of slab and process operation. And proposed the improvement of the geometric model of the tank.