论文部分内容阅读
为了保护底图,提高扎边质量,方便操作设计了与市购缝纫机配套的此工作台,供档案同行们参考。工作台由台板、翻板、支撑架、缝纫机组成。台板长1800毫米,宽1100毫米,台面距地面高度同缝纫机台面距地面高度,一般为750毫米。表面塑料贴面更好。在台板一侧中间位置开一个850毫米×360毫米的缺口,以便与缝纫机相配。翻板长视缝纫机台面宽度而定,一般为418毫米,宽为360毫米。以两只合页在台板底面连接,确保翻转自如。根据需要缝纫机可横放,翻板上翻;顺放,翻板下翻。
In order to protect the base map and improve the quality of the zipper edge, it is convenient to design and work with a commercially available sewing machine for the reference of its counterparts. The workbench consists of a platen, a flap, a support frame, and a sewing machine. The platen is 1,800 mm long and 1,100 mm wide. The height of the table surface from the ground is the same height as the surface of the sewing machine table, generally 750 mm. Surface plastic veneer is better. A 850 mm x 360 mm notch is opened in the middle of the side of the platen to match the sewing machine. The flap length depends on the width of the sewing machine table, which is generally 418 mm and width 360 mm. The two hinges are connected on the bottom surface of the platen to ensure that they can turn freely. According to the needs of the sewing machine can be placed horizontally, flip on the flip; along, flip down.