【摘 要】
:
The solidification curves of Al-8.5Fe, Al-8.5Fe-1.7Fe, Al-8.5Fe-1.7Si-1.3V alloys were examined by DTA under the condition of slow cooling rate, the phase const
【机 构】
:
School of Materials Science and Engineering
论文部分内容阅读
The solidification curves of Al-8.5Fe, Al-8.5Fe-1.7Fe, Al-8.5Fe-1.7Si-1.3V alloys were examined by DTA under the condition of slow cooling rate, the phase constitutes were examined by OM and XRD. The results show that, under slow cooling rate, the phases in Al-8.5Fe alloy are mainly α(Al) and Al13Fe4, the phases in Al-8.5Fe-1.7Si alloy are mostly α(Al), Al13Fe4, α-AlFeSi, β-AlFeSi, and comparing to Al-8.5Fe-1.7Si alloy, no other phases form in the Al-8.5Fe-1.3V-1.7Si alloy, but the chemical compositions of the phases are changed and the thermal stability of α-AlFeSi phase and β-AlFeSi phase is improved, due to the partial substitution of V for Fe atoms. The phase formation was calculated by Thermo-calc software at equilibrium condition, the calculated results were agreement with the experimental results.
其他文献
In order to understand the rate-controlling process for the interfacial layer growth of brazing joints brazed with activecomposite filler materials, the thickne
Corrosion resistance of ceramic substrate glazes to molten aluminum was studied in this paper. The glazes can spreadslightly in aluminum alloy according to SEM
Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used asfilms or coatings. In this work, sol-gel prep
Through microstructure observation and X-ray diffraction analysis, the equilibrium phase constituents of Al-Zn alloythat contains 2 at. pct Cu at room temperatu
The M2 high-speed steel strip was produced by using the laboratory scale twin roll strip caster. The microstructureand eutectic carbide morphology of thus produ
In this paper, the microstructures and mechanical properties of underwater laser welds of Type 304 stainless steelwere investigated. JISY308L type filler wire w
In this paper, a TiNi shape memory alloy fiber Ni matrix composite was fabricated by an electroplating method using TiNialloy as the cathode and Ni as the anode
The phase transformation behavior, mechanical properties, and the thermal stability of CuAlAg alloy were studied andminor rare earth (0.1 wt pct La+Ce) was adde
A type of CO2 sensor based on oxygen concentration cell was designed as following: Cell I: Pt | Au, O2,CO2|Na2CO3(Au)|NKBA(Au)|YSZ|O2, CO2|Pt or Cell Ⅱ: Pt|Au,
A new pressing method was proposed for hot-pressing process. Experimental results indicated that the porosity in Al2O3/TiC/Ni/Mo (hereafter called Al2O3/TiC com