论文部分内容阅读
2 YJZK50/42—40双级真空硬塑挤泥机结构、工作原理、技术特征、功能特点及技术参数2.1 组成如图3所示,本机由上级搅拌挤出和下级挤出两部分组成.上级搅拌挤出是由电动机8、气动离合器7、上级减速器6、喷水加料斗5、搅拌槽4、真空箱1等组成.减速器为专用减速器,设有单独润滑系统.搅拌槽入料口设有带喷水的加料斗.搅拌槽上装有高强度的安全护网.搅拌槽与真空箱之间由变径泥缸连接.真空箱顶部开盖为检修用,内有料位控制器、真空泵接口等设置.真空箱通过连接件与受料箱连接实现丁字型、—字型布置.上级所有部件均安装在机架上.
2 YJZK50/42-40 dual-stage vacuum plastic-plastic extruder structure, working principle, technical features, functional characteristics and technical parameters 2.1 Composition shown in Figure 3, the machine is composed of superior mixing extrusion and lower extrusion two parts. The superior stirring and extruding is composed of a motor 8, an air clutch 7, an upper speed reducer 6, a water spray hopper 5, a stirring tank 4, a vacuum box 1 and the like. The speed reducer is a special speed reducer and is provided with a separate lubrication system. The feed port is equipped with a hopper with water spray. The mixing tank is equipped with a high-strength safety net. The mixing tank is connected with the vacuum tank by a variable diameter mud cylinder. The top of the vacuum tank is opened for inspection and has a level controller. , vacuum pump interface and other settings. Vacuum box through the connection and the receiver box to achieve T-shaped, - font layout. All the upper components are installed on the rack.