【摘 要】
：
The purpose of underground methane drainage technology is to prevent methane disasters and enable the efficient use of coal mine methane (CMM),and the sealing depth is a key factor that affects the performance of under-ground methane drainage.In this work
【机 构】
：
Key Laboratory of Coal Methane and Fire Control,Ministry of Education,China University of Mining and
论文部分内容阅读
The purpose of underground methane drainage technology is to prevent methane disasters and enable the efficient use of coal mine methane (CMM),and the sealing depth is a key factor that affects the performance of under-ground methane drainage.In this work,the layouts of in-seam and crossing boreholes are considered to analyze the stress distribution and failure characteristics of roadway surrounding rock through a numerical simulation and field stress investigation to determine a reasonable sealing depth.The results show that the depths of the plastic and elastic zones in two experimental coal mines are 16 and 20 m respectively.Borehole sealing minimizes the air leakage through the fractures around the roadway when the sealing material covers the failure and plastic zones,and the field test results for CMM drainage at different sealing depths indicate that the CMM drainage efficiency increases with increasing sealing depth but does not change once the sealing depth exceeds the plastic zone.Moreover,sealing in the high-permeability roadway surrounding rock does not have a strong influence on the borehole sealing performance.Considering these findings,a new CMM drainage system for key sealing in the low-permeability zone was developed that is effective for improving the CMM drainage efficiency and prolonging the high-concentration CMM drainage period.The proposed approach offers a valuable quantitative analysis method for selecting the optimum sealing parameters for underground methane drainage,thereby improving considerably the drainage and utilization rates of CMM.
其他文献
Aiming at the poor location accuracy caused by the harsh and complex underground environment,long strip roadway,limited wireless transmission and sparse anchor nodes,an underground location algorithm based on random forest and compensation for environment
Tri-flo cyclone,as a dense-medium separation device,is one of the most typical environmentally friendly industrial techniques in the coal washery plants.Surprisingly,no detailed investigation has been conducted to explore the effectiveness of tri-flo cycl
An accurate assessment of root respiration in mine reclaimed soil is important for effectively evaluating mining area ecosystems.This study investigated dynamic changes in root respiration and the contribution of root respiration to total soil respiration
Crude phenols extracted using organic solvent from the wastewater of a typical fixed-bed gasification process was used as a raw material,and the distillation range was analyzed.The wide and narrow fractions of the raw material derived from distillation ra
A tool for calculating the economic and environmental impacts of the use of byproducts of industrial processes that can substitute for perishable resources was presented.This was exemplified by fly ash (the fine fraction of ash originating from coal burne
A 72-h ex situ hard coal gasification test in one large block of coal was carried out.The gasifying agent was oxygen with a constant flow rate of 4.5 m3/h.The surroundings of coal were simulated with wet sand with 11％ moisture content.A 2-cm interlayer of
The movement of the floating connecting mechanism between a hydraulic support and scraper conveyor is space movement;thus,when the hydraulic support pushes the scraper conveyor,there is an error between the actual distance of the scraper conveyor and the
The main objective of this study was to evaluate eight kinds of trace element pollutants in groundwater from a typical coal mine area,and carry out a corresponding health risk assessment for the local populace.To do this,34 shallow groundwater (SG) sample
The heat exchanger network (HEN) in a syngas-to-methanol process was designed and optimized based on pinch technology under stable operating conditions to balance the energy consumption and economic gain.In actual industrial processes,fluctuations in prod
Clean-energy substitution technology for existing residential buildings in cities is an inevitable choice for sustainable development and low-carbon ecological city construction.In this paper,the current status of energy-saving renovation and renewable-en