装有角螺旋衬板的磨机,由于衬板结构形状及研磨体在其中的运动规律和普通圆断面磨机相比,发生了根本的变化,因而磨机的主要工艺参数之一—磨机的适宜转速也必然发生变化。为此,我们对装有角螺旋衬板磨机的适宜转速进行了理论分析和研究。参照一般磨机的适宜转速的研究理论,通过研究最外层研磨体处于最佳工作状态时的转速,分两种情况确定装置角螺旋衬板磨机的适宜转速。一、研磨体具有最大平均降落高度时磨机的转速 Grinder with angle spiral liner, due to the shape of the liner and grinding body in which the law of movement compared with the ordinary round-section mill, a fundamental change has taken place, so the mill one of the main process parameters - mill The appropriate speed is bound to change. For this reason, we have carried on the theory analysis and the research to the appropriate rotation speed which the angle spiral lining mill installed. With reference to the theory of proper speed of general mill, the optimum speed of mill was studied in two conditions by studying the speed of the outermost mill at the best working condition. First, the grinding body with the maximum average height of the mill when the speed of rotation