论文部分内容阅读
对于框架梁模板,人们常常采用底木侧钢的支设方法,侧模板是采用组合钢模板。由于现行梁截面高度大部分以50mm 为模数,与组合钢模板宽度模数相同,因此在保证梁高参数等各种要求的前提下,提高了钢模板的重复利用率。但是,采用底木侧钢支设方法有以下缺点:一是组
For the frame beam formwork, people usually use the support method of the side steel side steel, and the side formwork is to use the combined steel formwork. Because most of the current beam section height is 50mm as the module, and the width modulus of the composite steel formwork is the same, therefore, under the premise of ensuring the beam height parameters and other requirements, the reusability of the steel template is improved. However, the use of bottom-side steel support methods has the following disadvantages: First, the group