当离合器从动盘摩擦片损坏,铆钉露出时,应重新更换摩擦片,具体方法如下: 1.除去旧摩擦片一般先用钻头钻出旧铆钉,然后用钢丝或砂布清除从动盘钢片上的铁锈和污垢。 2.检查从动盘钢片用锉将钢片铆钉孔毛刺锉掉,检查钢片是否扭曲或翘曲,如扭曲则应加以校正。 When the friction plate of the driven disc of the clutch is damaged and the rivets are exposed, the friction plate should be replaced as follows: 1. Remove the old friction plate, drill the old rivet first with a drill, then clean the plate with steel wire or emery cloth Rust and dirt. 2. Check the driven disc steel file with a rasp hole burr file, check the steel is warped or warped, such as distortion should be corrected.