【摘 要】
：
The corrosion behavior of the nitinol alloy was studied in various corrosion media of different Cl- ion concentrations. The results demonstrate that the Cl- ion
【机 构】
：
Center of Materials Physics and Chemistry,Guizhou Academy of Science
论文部分内容阅读
The corrosion behavior of the nitinol alloy was studied in various corrosion media of different Cl- ion concentrations. The results demonstrate that the Cl- ion concentration has significant influences on the corrosion behavior of the nitinol alloy. In order to enhance the corrosion resistance, protective films were generated on the surface of the nitinol alloy by means of the electrochemical passivation method, for which five different electrolytic solutions were investigated. The surface analysis indicates full growth of all samples passivated in the different electrolytic solutions with layers, however, showing different morphological features. Without any defects like micro-cracks and pores, the surface of the samples passivated in the molybdate solution turns out smoother and denser than those passivated in other solutions. It is shown that the electro-chemical passivation will reduce Ni content but increase Ti content in the surface, reaching the Mole ratio of Ti:Ni = 9.01:1 on the outermost surface. Potentiodynamic polarization test demonstrates that the samples electrochemically passivated in the molybdate solution present a significant increase in breakdown potential due to titanium enrichment on the outermost surface.
其他文献
In this paper, a class of real-time parallel combined methods (RTPCM) of the digital simulation for a partitioned large system is presented. By means of combina
The structures of the Mn-Zn ferrites synthesized under different sintering conditions by the sol-gel method were investigated by the X-ray diffraction (XRD) and
Thermal barrier coatings (TBCs) were developed to protect metallic blades and vanes working in turbo-engines. The two-layered structure TBCs, consisting of NiCo
Mesocarbon microbeads (MCMB) and super fine mesophase powder (SFMP) were prepared firstly from a coal tar pitch and then hot-condensed into high-density isotrop
Usually, it is very difficult to find out an analytical solution to thermal conduction problems during high temperature welding. Therefore, as an important nume
A new approach in combination of the effective medium theory with the equivalent unit in numerical simulation was developed to study the effective thermal condu
Compound ceramics coatings on the Ti-6Al-4V alloy were prepared by the direct current micro-plasma oxidation (MPO) in NaAlO2 solution. The composition and morph
非高斯非平稳随机信号处理是当前信号处理领域的研究热点,具有重要的理论意义和实际价值.采用TVAR模型来描述非平稳随机信号,在α稳定分布噪声条件下,传统的递推最小二乘(RLS
In an attempt of being used as buffer layers and electrodes for the textured BaTiO3 (BTO) ferroelectric thin films, highly (100)-oriented LaNiO3 (LNO) thin film
The electronic structures of the titanium dioxide(TiO2) doped with V and Fe were analyzed by using first-principle calculations based on the density functional