NSA-400手工氩弧焊机主要应用在铝板拼接和铝容器的环面焊接。由于我厂的生产特性,该焊机使用仍然较为普遍,使用频率很高。在多年的使用过程中发现,该设备无论在设计工艺技术的硬件和软件上都存在着不足之处,已严重影响了本厂生产焊接质量和生产进度。随着生产规模的扩大和板材厚度的增加,它的性能缺点越来越显著。为了满足杭氧生产的需要,同时根据实际使用情况,进行了以下技术 NSA-400 manual welding machine is mainly used in aluminum splicing and aluminum container torus welding. Due to the production characteristics of our factory, the use of the welder is still more common and the frequency of use is very high. During years of use, it has been found that the device has defects in the hardware and software of the design process technology and has seriously affected the welding quality and the production progress of the factory. With the expansion of production scale and the increase of sheet thickness, its performance shortcoming is more and more obvious. In order to meet the needs of the production of oxygen, at the same time based on the actual use of the following technologies