在修理车辆或其他设备时,常会遇到要从基座或壳体上取出与座及轴紧配合的带卡环槽的轴承,有时由于配件紧凑,难以从轴承背面敲出,为此,我们加工了下面这件专用工具,方便了维修拆卸。(1)制作方法首先测量出轴承外径、卡环槽底部直径、槽宽;然后车制出如图1所示的带榫环工具,其中a In the repair of vehicles or other equipment, often encounter from the base or the housing removed with the seat and shaft with a snap ring groove bearing, sometimes due to the compact parts, difficult to knock out from the back of the bearing, for which we Processed the following special tools to facilitate the maintenance of demolition. (1) production method First of all, measuring the bearing outer diameter, snap ring groove bottom diameter, groove width; and then the car system shown in Figure 1 with tenon ring tool, in which a