【摘 要】
：
An Mg-2Zn-0.6Zr-0.6Nd alloy for biodegradable cardiovascular stent applications was prepared through indirect extrusion.The alloy exhibited a superior combinati
【机 构】
：
School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing,
论文部分内容阅读
An Mg-2Zn-0.6Zr-0.6Nd alloy for biodegradable cardiovascular stent applications was prepared through indirect extrusion.The alloy exhibited a superior combination of tensile yield strength (TYS),ultimate tensile strength (UTS) and elongation (EL) of about 269 MPa,298 MPa and 25.6 ％,respectively.In addition,the non-destructive electrochemical frequency modulation (EFM) technique was used for the first time to investigate the corrosion behavior of Mg alloys combined with electrochemical impedance spectroscopy (EIS) in Dulbecco's Modified Eagle's Medium (DMEM) and in Hank's solution.Compared with the corrosion rate of 0.07 mm/year in Hank's solution,lower corrosion rate of 0.03 mm/year was achieved in DMEM.The significant differences between the corrosion rate trends were discussed and related with the composition of the corrosion layer formed.Depending on the biomimetic fluids tested,different corrosion products were precipitated on the alloy's surface: a compact and homogeneous layer of MgxCay(PO4)z and Zn(OH)2 and organic compounds was formed in DMEM,whereas a partial coverage of MgxCay(PO4)z and Mg(OH)2 was formed in Hank's solution.
其他文献
Effect of cooling rate on the 3D morphology and the growth mechanism of the proeutectic Al3Ni intermetallic compound (IMC) that forms at the Al/Ni interface aft
304 stainless steel (SS) used as orthodontic wire during orthodontics faces the risk of microbiologically influenced corrosion (MIC) due to diverse flora enviro
Grain boundary precipitation and segregation play an important role in determining mechanical properties of Mg alloys.In the present work,we studied work focuse
SiC nanowires/pyrocarbon (SiCnws/PyC) core-shell structure toughened C/C-ZrC-SiC composites were fabricated by CLVD process,and the influences of PyC shell thic
To gain high efficiency and low fuel consumption,aluminum-based abradable seal coatings had been widely used in the compressor casing of aero engines or gas tur
Metal corrosion often results in incalculable economic loss and significant safety hazards.Although numerous traditional methods have been used to mitigate the
This work focuses on irradiation behaviors of a novel silicon carbide and carbon coated nanostructured ferritic alloy (SiC-C@NFA) composite for potential applic
As one of the fundamental outcomes of dislocation self-interaction,dislocation dipoles have an important influence on the plastic deformation of materials,espec
Here,we demonstrate an in-situ growth of micropatterned silver nanospheres (Ag NS) array on transparent polyimide (PI),namely PI-Ag substrate,applied as a flexi
Maxwell-Voigt model with two Kelvin units and one Maxwell unit was utilized to analyze the microalloying effect of Cu on the creep behavior of CoFe-based metall