一般的数据测量系统是通过传感器将捕捉的现场信号转换为电信号,经模/数转换器ADC采样、量化、编码后,成为数字信号,存入数据存储器或送给微处理器,或通过无线方式将数据发送给接收端进行处理。有时由于环境条件的限制或高速测量的要求,使得一般的测量系统很难满足这样的要求。 General data measurement system is through the sensor will capture the scene signal is converted to electrical signals, ADC by the ADC sampling, quantization, encoding, into a digital signal, stored in data memory or sent to the microprocessor, or through wireless Way to send data to the receiver for processing. Sometimes due to environmental conditions or high-speed measurement requirements, making the measurement system is difficult to meet such a general requirement.