我厂工人师傅在实践中开动脑筋,采用了一种最简单实用的冷却方法,取得了良好的效果。 这种方法是利用医院用过的滴流瓶,洗刷后装上切削液,以挂吊针的方式将切削液通过输液管滴入工件加工部位。在无切削液的机床上,或虽有冷却系统,但被加工工件所需切削液与其不符时,通常使用毛刷蘸着切削液进行冷却。这样不仅需要耗费人力,而且冷却效果不佳,还造成切削液较大的浪费。而采用挂滴流瓶冷却的方法,就可解决这些问题,真可谓一举三 I plant workers master in practice brains, using one of the most simple and practical cooling method, and achieved good results. This method is to use the hospital trickle bottle, wash after the installation of cutting fluid to hang the needle way to the cutting fluid through the infusion tube into the workpiece processing parts. In the absence of cutting fluid on the machine, or although the cooling system, but the machining of the workpiece required cutting fluid does not match, usually with a brush dipped in cutting fluid cooling. This requires not only labor-intensive, but also poor cooling, but also caused a greater waste of cutting fluid. The use of hanging drip bottle cooling method, you can solve these problems, it can be described as triple action