论文部分内容阅读
This paper presents a single-ended input differential output low-noise amplifier intended for GPS applications. We propose a method to reduce the gain/amplitude and phase imbalance of a differential output exploiting the inductive coupling of a transformer or center-tapped differential inductor.A detailed analysis of the theory of imbalance reduction,as well as a discussion on the principle of choosing the dimensions of a transformer,are given.An LNA has been implemented using TSMC 0.18μm technology with ESD-protected.Measurement on board shows a voltage gain of 24.6 dB at 1.575 GHz and a noise figure of 3.2 dB.The gain imbalance is below 0.2 dB and phase imbalance is less than 2 degrees.The LNA consumes 5.2 mA from a 1.8 V supply.
This paper presents a single-ended input differential output low-noise amplifier intended for GPS applications. We propose a method to reduce the gain / amplitude and phase imbalance of a differential output exploiting the inductive coupling of a transformer or center-tapped differential inductor. A detailed analysis of the theory of imbalance reduction, as well as a discussion on the principle of choosing the dimensions of a transformer, are given. An LNA has been implemented using TSMC 0.18 μm technology with ESD-protected. Measurement on board shows a voltage gain of 24.6 dB at 1.575 GHz and a noise figure of 3.2 dB. The gain imbalance is below 0.2 dB and phase imbalance is less than 2 degrees. The LNA consumes 5.2 mA from a 1.8 V supply.