砖混结构圈梁模板应按图施工,不能顺墙跑,具体做法如下: 、1.查标高:用一根长约3米的的木条,在上端钉一颗钉子,以便挂在模板上皮。下端锯齐,从下端向上量取楼层高度、楼板厚度、地面厚度,画线钉钉,挂在模板上皮,下端和墙线比较:如果重合,在模 The brick-concrete ring beam formwork should be constructed according to the diagram, but it cannot be run along the wall. The specific methods are as follows: 1. Check the height: Use a wooden strip about 3 meters long and nail a nail at the top to hang it on the template skin. . The lower end of the saw is equalized, and the height of the floor, the thickness of the floor, and the thickness of the floor are measured upward from the lower end. The line nails are hung on the template skin and the lower end is compared with the wall line: if they are coincident, the die