论文部分内容阅读
1 错边量、棱角度缺陷对压力容器的影响 (1)错边量、棱角度缺陷主要影响压力容器的受力状况,产生应力集中,提高了局部应力水平,提高多少是很多检验研究人员所关心的问题。《检规》把两类缺陷的超标程度划分为“一般”和“严重”两档,《检规》讲析中说明:“一般”和“严重”的区别,由于实际情况的错综复杂,因此没有作具体规定,由检验员根据具体情况作结论。《检规》第35条不做出具体规定,是因为在处理具体问题时需要考虑的因素比较多,情况比较复杂,各因
1 The wrong side of the amount of edge angle defects on the impact of pressure vessels (1) the wrong side of the amount of edge defects mainly affect the pressure vessel stress conditions, resulting in stress concentration, increased local stress levels, to enhance the number of inspection and research staff issue concerned. The “inspection rules” classifies the two types of defects as “normal” and “serious” in their degree of oversight. The difference between “normal” and “serious” Due to the complexity of the actual situation, there is no specific regulation, and the examiner will make the conclusion according to the specific conditions. Article 35 of the “Regulations” makes no specific provisions because more factors need to be considered in handling a specific issue, the situation is more complicated,