The previous research of precision grinding optical glasses with electrolytic in process dressing (ELID) technology mainly concentrated on the action of ELID and machining parameters when grinding,which aim at generating very "smoothed" surfaces and reducing the subsurface damage.However,when grinding spectrosil 2000 and BK7 glass assisted with ELID technology,a deeply comparative study on material removal mechanism and the wheel wear behaviors have not been given yet.In this paper,the micro/nano indentation technique is initially applied for investigating the mechanical properties of optical glasses,whose results are then refereed to evaluate the machinability.In single grit diamond scratching on glasses,the scratching traces display four kinds of scratch characteristics according to different material removal modes.In normal grinding experiments,the result shows BK7 glass has a better machinability than that of spectrosil 2000,corresponding to what the micro/nano indentation vent revealed.Under the same grinding depth parameters,the smaller amplitude of acoustic emission (AE) raw signals,grinding force and grinding force ratio correspond to a better surface quality.While for these two kinds of glasses,with the increasing of grinding depth,the variation trends of the surface roughness,the force ratio,and the AE raw signals are contrary,which should be attributed to different material removal modes.Moreover,the SEM micrographs of used wheels surface indicate that diamond grains on the wheel surface after grinding BK7 glass are worn more severely than that of spectrosil 2000.The proposed research analyzes what happened in the gnnding process with different material removal parerns,which can provide a basis for producing high-quality optical glasses and comprehensively evaluate the surface and subsurface integrity of optical glasses.