论文部分内容阅读
为了回收切屑,节约资金,降低成本,我厂制成了一种可用来自动分离铜屑和铁屑的机器——铜铁屑分离器。结构及其工作原理机机架4用角鉄焊接面成,电机6(0.3千瓦,940轉/分)通过小槽轮5,三角皮带2传动大槽轮3,大槽轮固定在轴16上,并用两个瓦架把轴架在机架上,前端插到料斗1里,带动翻料滚15做转动工作。轴16的转速一般应控制在60～80转/分;翻料滚15的外径约在40～50毫米,在翻料滚15的轴向开有小槽(槽的大小,应根据切屑的大小与电磁铁吸力的大小来定)。翻料滚15与料斗1底部的圆弧紧贴着转动。在翻料滚
In order to recover the chips, save money and reduce costs, our factory made a copper scrap separator that can be used to automatically separate the copper scrap from the iron scrap. Structure and working principle The machine frame 4 is made by welding the angle 鉄 face, the motor 6 (0.3 kilowatts, 940 rpm) passes through the small sheave 5 and the V-belt 2 drives the large sheave 3, and the large sheave is fixed on the shaft 16 , And the two racks to the shaft rack in the rack, the front end inserted into the hopper 1, driven by turning the roller 15 to do the work. The rotational speed of the shaft 16 should generally be controlled at 60 to 80 rpm; the outer diameter of the turning roller 15 is about 40 to 50 mm, and a small groove (the size of the groove should be defined in the axial direction of the turning roller 15) Size and the size of the suction solenoid to be). Conveying roller 15 and hopper 1 at the bottom of the circular arc close rotation. Rollover roll