内半轴圆锥滚子轴承预紧度调整内半轴圆锥滚子轴承预紧度是通过改变两轴承间调整垫片的组合厚度来实现的,减小组合垫片的厚度,预紧力增大,反之减小。先不装半轴油封,轴承上涂少许润滑油,选取合适厚度的垫片组合,对转向节支承座、轴承和内半轴进行预装配,用300～345牛·米的力矩 Internal semi-tapered roller bearing preload adjustment Internal semi-tapered roller bearing preload by changing the combination between the two bearings to adjust the thickness of the gasket to achieve, reducing the thickness of the gasket, preload increases , And vice versa. First, install the semi-shaft oil seal, apply a little lubricating oil on the bearing, select a combination of washers of suitable thickness to pre-assemble the bearing seat, bearing and inner half shaft of steering knuckle, and torque 300 ~ 345 Nm