论文部分内容阅读
介绍了环形对苯二甲酸丁二醇酯(CBT)的性能特点及其应用,综述了纤维增强CBT树脂基复合材料的国内外研究现状,包括制备工艺、力学性能以及应用等,并对其在复合材料领域的发展进行了总结与展望.
纤维增强CBT树脂基复合材料研究进展
【摘 要】
：
介绍了环形对苯二甲酸丁二醇酯(CBT)的性能特点及其应用,综述了纤维增强CBT树脂基复合材料的国内外研究现状,包括制备工艺、力学性能以及应用等,并对其在复合材料领域的发展
【机 构】
：
海装驻武汉地区军事代表局,湖北武汉430030;武汉理工大学材料科学与工程学院,湖北武汉430070;中国船舶重工集团公司第七二五研究所,河南洛阳471023
【出 处】
：
材料开发与应用
【发表日期】
：
2021年2期
其他文献
High-throughput development and applications of the compositional mechanical property map of the β t
By a combination of the nanoindentation and electron probe microanalysis (EPMA) techniques,the traditional diffusion couple technique is extended to map the mec
Phosphorus-doped Fe7Ss@C nanowires for efficient electrochemical hydrogen and oxygen evolutions: Con
Developing low-cost,efficient,and stable non-precious-metal electrocatalysts with controlled crystal structure,morphology and compositions are highly desirable
采用有限元辅助进行碳纤维扭转轴定刚度设计,通过碳纤维缠绕成型工艺制备碳纤维扭转轴,并进行扭转刚度测试验证.结果 表明,有限元计算得到碳纤维扭转轴扭转刚度为31.08 kN·m
针对目前模压、缠绕等工艺成型烧蚀防热复合材料易造成层间结合差、脱粘、抗烧蚀性能差、易剥蚀等问题,提出了一种新型压力辅助RTM工艺,并对其进行了树脂充模流动模拟,制备了烧蚀防热复合材料,测试了材料的孔隙率、力学性能、烧蚀性能。结果表明:压力辅助RTM工艺具有可行性与优越性,复合材料孔隙率4.64%,层间剪切强度39.3 MPa,线烧蚀率0.017 mm/s,质量烧蚀率0.0538 g/s。说明压力辅助RTM工艺适合成型烧蚀防热复合材料。
金属材料疲劳裂纹扩展速率是对金属材料及其零构件含有裂纹体后安全服役评价及疲劳寿命评估的一项重要力学性能指标。基于金属材料疲劳裂纹扩展过程的不同阶段、闭合效应、应力比对疲劳裂纹扩展速率的影响等多个方面,对几种常见金属材料疲劳裂纹扩展速率模型的应用特点进行了对比分析,为安全设计及寿命评估时不同模型的选择应用提供参考。
Microstructure tailoring of Al0.5CoCrFeMnNi to achieve high strength and high uniform strain using s
Ultrafine-grained alloys fabricated by severe plastic deformation (SPD) have high strength but often poor uniform ductility.SPD via high-ratio differential spee
The widespread use of water-repellent superhydrophobic surfaces is limited by the inherent fragility of their micro-and nanoscale roughness,which is prone to da
Synthesis of super-fine L10-FePt nanoparticles with high ordering degree by two-step sintering under
Super-fine L10-FePt nanoparticles (NPs) with high ordering degree were successfully prepared by a modified two-step sintering method,which includes low-temperat
One step method of structure engineering porous graphitic carbon nitride for efficient visible-light
Porous g-C3N4 nanosheets (PCN) were prepared by the nickel-assisted one-step thermal polymerization method.Hydrogen (H2) which was produced by the reaction betw