X6130铣床离合器存在快慢速分不清的缺陷,当电器开关拨至进给位置时,应该是慢速进给,却出现了形速;当揿下快速按钮时,实现了快速,抬起快速按钮,仍是快速,不能顺利地转入工进速度,导致打坏工具,造成废品。经仔细分析(图1),当按下快速按钮,电磁线圈5通电,通过三个钢球压盘机,主动离合器片2与被动离合器片3被压紧,动力经双联齿轮1及与它联接在一起的外壳 X6130 milling machine clutch there are speed and speed can not tell the shortcomings, when the electrical switch to the feed position, it should be slow feed, but there has been a shape of the speed; when the push button under the rapid, fast, lifted quickly Buttons are still fast and can not be smoothly transferred into work-in-progress, resulting in broken tools, resulting in scrap. After careful analysis (Figure 1), when pressing the quick button, the solenoid 5 energized through the three steel ball platen machine, the active clutch plate 2 and the passive clutch plate 3 is pressed, the power through the double gear 1 and with it Shell connected together