The influence of the characteristics of a collection of particles on the scattered spectral density

来源 :ChineseOpticsLetters | 被引量 : 0次 | 上传用户:ah20090907
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The far-zone scattered spectral density of a light wave on the scattering from a collection of particles is investigated, and the relationship between the character of the collection and the distribution of the scattered spectral density is discussed. It is shown that both the number of particles and their locations in the collection play roles in the distribution of the far-zone scattered spectral density. This phenomenon may provide a potential method to reconstruct the structure character of a collection of particles from measurements of the far-zone scattered spectral density.
其他文献
光刻机的照明光瞳性能对曝光图形质量和套刻精度均有重要影响。照明光瞳由光刻机照明系统产生,在光刻机长时间使用后,照明光瞳的性能会逐渐劣化,需要采用光瞳校正手段来改善照明光瞳的性能。本文提出一种径向环状多分区高能量利用率光瞳校正方法,该方法在径向环状多分区方法的基础上优化了常规光瞳校正方法中基准能量的选取方式,可设计出适用于多种照明模式的单一光瞳校正板。在不将光瞳性能校正至零的情况下,该方法可以使得校正后的光瞳性能满足需求,这样可减小由光瞳校正所引起的能量损失。通过对劣化光瞳的校正分析,可以发现:所提方法可将
采用LD抽运腔内倍频532 nm Nd∶YAG激光器作抽运源, 通过合理的谐振腔膜系设计, 只使用一个输出镜就实现了可调谐钛宝石固体激光器(DPL)697~942 nm的可调谐激光输出。在18 W的抽运功率下, 其输出功率为3.5 W, 重复频率为3.9 kHz; 通过采用I类相位匹配的LBO晶体(LiB3O5, Θ=90°,Φ=33.2°, 3 mm×6 mm×20 mm)进行腔外倍频后实现了波长350~465 nm平均功率达540 mW(400 nm)连续可调的蓝紫激光输出; 通过激光聚焦导光系统、扫
A joint clustering and classification approach is proposed. This approach exploits unlabeled data for efficient clustering, which is applied in the classification with support vector machine (SVM) in the case of small-size training samples. The proposed m
本文采用非线性法布里-珀罗腔的全光光学方法,在C60/C70薄膜中首次观测到双稳开关现象,其开关时间为10 ns.
期刊
采用空间载频干涉方法在精确测量薄片激光晶体热畸变的基础上,深入研究了射流冲击冷却系统对薄片激光晶体热畸变的影响。实验结果表明,射流冲击冷却系统引起薄片激光晶体的畸变主要是球面形变。随着抽运功率的增加,薄片激光晶体的热畸变越发严重,在抽运区中心部分,以球面形变为主,其光焦度随抽运功率的增加呈线性下降。而在抽运区的边缘,以非球面形变为主,抽运功率越高,非球面畸变就越严重。给出了493 W抽运条件下热畸变的波前畸变曲线,其均方根的重复测量精度为1.153 nm。实验结果与理论分析结果相符,该研究为薄片固体激光器
The propagation of picosecond deep ultraviolet laser pulse at wavelength of 193 nm in air is numerically investigated. Long plasma channel can be formed due to the competition between Kerr self-focusing and ionization induced defocusing. The plasma channe
期刊
针对钢轨表面缺陷检测中,钢轨表面图像存在背景不均匀、缺陷尺度变化大且样本数据不足的问题,提出一种基于图像增强与改进Cascade R-CNN的钢轨表面缺陷检测方法。首先,采用改进Retinex算法处理钢轨表面图像,增强缺陷与背景的对比度。然后,采用改进Cascade R-CNN对钢轨表面缺陷进行检测,并应用交并比(IoU)平衡采样、感兴趣区域对齐和完全交并比(CIoU)损失分别解决训练样本IoU分布与困难样本IoU分布不平衡、感兴趣区域池化中取整量化导致的感兴趣区域与提取的特征图不匹配和回归损失Smoot
期刊