【摘 要】
：
The dynamic modeling and solution of the 3-(R)RS spatial parallel manipulators with flexible links were investigated. Firstly, a new model of spatial flexible b
【基金项目】
：
the National Natural Science Foundation of China Project;Beijing Natural Science Foundation, China Project;the Key Laboratory of Complex Systems and Intelligence Science,Institute of Automation,Chines
论文部分内容阅读
The dynamic modeling and solution of the 3-(R)RS spatial parallel manipulators with flexible links were investigated. Firstly, a new model of spatial flexible beam element was proposed, and the dynamic equations of elements and branches of the parallel manipulator were derived. Secondly, according to the kinematic coupling relationship between the moving platform and flexible links, the kinematic constraints of the flexible parallel manipulator were proposed. Thirdly, using the kinematic constraint equations and dynamic model of the moving platform, the overall system dynamic equations of the parallel manipulator were obtained by assembling the dynamic equations of branches. Furthermore, a few commonly used effective solutions of second-order differential equation system with variable coefficients were discussed. Newmark numerical method was used to solve the dynamic equations of the flexible parallel manipulator. Finally, the dynamic responses of the moving platform and driving torques of the 3-RRS parallel mechanism with flexible links were analyzed through numerical simulation. The results provide important information for analysis of dynamic performance, dynamics optimization design, dynamic simulation and control of the 3-RRS flexible parallel manipulator.
其他文献
在随机变量分布为部分信息的情况下,提出了最坏情况下的条件风险(Worst-case condi-tional value-at-risk,WCVaR)指标,并建立了风险-利润的三个鲁棒组合优化模型.该模型具有
The Indium tin oxide (ITO) thin film possesses excellent photoelectric properties that enable it to act as an ideal transparent conductor. To obtain high-qualit
Zr_(58.5)Ti_(14.3)Nb_(5.2)Cu_(6.1)Ni_(4.9)Be_(11.0) bulk metallic glass matrix composites, containing β-Zr dendrites, were fabricated by Bridgman solidificatio
Superfine cerium-zinc oxides Ce_(1-x)Zn_xO_(2-x) with x = 0, 0.1, 0.3, 0.5, and 1.0 were obtained by grinding Ce(SO_4)_2·4H_2O,ZnSO_4·7H_2O and NH_4HCO_3 unde
Aluminum coatings on Mg alloy AZ31 were fabricated using the thermal spraying technique, and then sealed with silane. The surface morphology and chemical groups
The hot compression tests of Super304H austenitic heat resistant steel were carried out at 800-1200℃ and 0.005-5 s~(-1) using a Gleeble 3500 thermal-mechanical
The adsorption of Ca( Ⅱ) ions from aqueous solution by chitosan a-ketoglutaric acid (KCTS) and hydroxamated chitosan a-ketoglutaric acid (HKCTS) was studied in
The influences of 2.5wt% Mn addition on the microstructure and mechanical properties of the Cu-11.9wt%Al-3.8wt%Ni shape memory alloy (SMA) were studied by means
Fe-based amorphous alloys with high inm content of 76at%-80at% were synthesized in the Fe-Mo-Si-P-C-B alloy system by the single roller melt-spinning technique.
The mixture of factor analyzers (MFA) can accurately describe high resolution range profile (HRRP) statistical characteristics.But how to determine the proper n