武钢冷连轧的生产水平较低,月轧制量最高不足七万吨,每批≤0.28mm极薄板(镀锡原板等),半个月内也轧不出一万吨,平均小时产量离开设计值很远,即使国外钢卷原料及其专家帮助多年,亦是如此,极薄板的平均小时量不足设计值之半,这引起了大家对七十年代引进技术的管理产生了疑问,现在进行深入探讨,极有必要。 The production of tandem cold rolling in WISCO is relatively low. The monthly output of rolling is up to less than 70,000 tons. Each batch of very thin sheet ≤0.28mm (original tin plate, etc.) can not be rolled out by 10,000 tons within half a month and the average hourly output leaves The design value is far away, even though foreign coil materials and their experts have helped for many years, and the average hourly volume of very thin plates is less than half of the design value, which raises questions about the management of imported technologies in the 1970s and is now underway In-depth discussion is extremely necessary.