Safety aware fuzzy longitudinal controller for automated vehicles

来源 :交通运输工程学报(英文版) | 被引量 : 0次 | 上传用户:fhdfhdfrtr
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Vehicle automation holds significant opportunities in the efforts for safer road traffic.Even lower levels of automation like adaptive cruise control(ACC)systems have great potential.Apart from safety benefits,ACC systems could improve the efficiency of traffic networks.However,contemporary ACC systems are designed to be comfortable,but not guaranteed to be safe.Moreover,according to recent literature studies,they have been found to be conservative and string unstable,with traffic oscillations being amplified when traveling downstream.Due to those issues,severe problems can arise in the traffic flow and the efficiency of road traffic networks may deteriorate.Automating the vehicles\'longitudinal movement through ADAS systems offers new opportunities in improving the safety conditions on the roads by designing more consistent controllers.In the pre-sent paper,a fuzzy controller is developed for automated longitudinal vehicle control.The controller is validated through simulation and real-world data of ACC systems that are currently available in the market.Using fuzzy surrogate safety metrics,the controller becomes aware of the safety level of any situation and can react properly.Moreover,the driving behavior is efficient for the traffic flow,comfortable and string stable,dampening traffic shockwaves that travel upstream.Results prove the robustness of the proposed solution.
其他文献
内燃动车上的柴油机及变速箱之类的驱动装置使用的轴承等滑动零件一旦发生异常磨损及热胶粘等损伤时,则有可能因设备异常而发生重大事故,甚至造成运行中断.本文介绍日本铁道综合技术研究所根据技术传承及检修作业高效化的观点,开发低成本、简便且快速进行设备异常诊断的方法.论述了内置在线式铁粉质量浓度传感器的润滑油分析装置的工作原理和概况,经过应用试验及设备异常模拟试验等,表明了该装置可以应用于设备异常诊断.
高崎车辆中心在进行车辆维修中发现最近采用的车轴发电机的传动带发生脱落现象.为查明传动带脱落原因,防范再次发生此类故障开展了调查研究.文章介绍对各种传动带开展性能分析,以把握“传统皮带”与“代用皮带”的性能差异及特性,使“代用皮带”的替换标准数值化,实现了传动带维修方法的标准化.
牵引电动机是驱动电动车组的重要设备,当电动机发生故障时,在最不利的情况下,会导致电动车组不能运行,电动机零件中频繁发生故障的是轴承部件.在早期检测到轴承的异常,可以防范故障于未然,进一步提高动车组的安全性和可靠性.本文介绍了为检测电机轴承异常而开发的结合了倍频带分析与机器示教的异常检测方法,并阐述验证该方法性能的异常模拟试验结果.
介绍了使用CFD软件模拟合成气离心压缩机防喘振调节阀实际工况下的内部流场情况,利用三维建模软件、CFD流场模拟分析软件进行了防喘振调节阀产品设计验证,为防喘振调节阀国产化提供了直观、可靠的分析数据.
本文研究了双金属耐磨板的结构组织和性能,以及在世界各国实践中有关耐磨板生产中堆焊过程的特点.详细地阐述了俄罗斯国内生产双金属板新开发的工艺.指出了该项工艺在使设备免遭磨料磨损方面的效果.
为适应将来新干线的发展,在车辆技术领域,需要在以下方面实施技术开发:针对空气阻力的削减以降低噪声及隧道微气压波等,以实现与环境协调;为提高安全性能,缩短地震情况下的制动距离;进一步提高乘客乘车舒适度等.本文介绍为实现新干线的持续发展,日本铁道综合技术研究所在车辆技术领域有望作出贡献的研发实例.
The prices of fossil fuels,the gap between energy supply and demand,energy security,environmental issues,and the reduction of greenhouse gas emissions commonly promote the development of biomass power generation in China.Compared to direct biomass combust
黄铜阀门阀盖是压力调节阀中的重要零件,针对黄铜阀门配件性能要求,介绍了一种能替代金属材料的PPA材料.阀盖内、外部均设有螺纹结构,为保证阀盖生产后产品外螺纹起牙位置统一、内螺纹顺利脱模,其模具结构针对内螺纹设计一种齿轮带动螺纹旋转的绞牙结构,用液压马达传动系统带动螺纹型芯转动实现脱模.为保证设计后的阀盖不变形、不开裂、试验强度达到要求,给出了材料选型、模腔结构、注塑过程及其工艺设计等控制方法.
介绍了高温高压电站阀门作为压力管道元件在电厂生产中的工作特性和控制要求.针对某电厂主蒸汽闸阀在运行中,阀体出现裂纹、硬度低及金相球化超标的现象,通过以主蒸汽闸阀(DN225、P54100V)为例,分析了阀体硬度低和金相球化超标的原因,并给出了改进方法和解决方案.
介绍了一种应用于输气管网调压控制设备技术领域的高压控制减压阀,它既可作为单个减压阀独立使用,也可作为控制阀与输气主管管线上的主阀配套连接组成高压调压器使用.