【摘 要】
：
Choosing proper perfusates as contrast agents is an important aspect for postmortem magnetic resonance angiography(PMMRA).However,in this emerging field,the number of suitable kinds of liquid is still very limited.The objective of this research is to comp
【机 构】
：
Institute of Evidence Law and Forensic Science, China University of Political Science and Law(CUPL),
论文部分内容阅读
Choosing proper perfusates as contrast agents is an important aspect for postmortem magnetic resonance angiography(PMMRA).However,in this emerging field,the number of suitable kinds of liquid is still very limited.The objective of this research is to compare MR images of oleic acid(OA)with paraffin oil(PO)in vitro and in ex situ animal hearts,in order to evaluate the feasibility to use OA as a novel contrast agent for PMMRA.In vitro,OA,PO and water(control)were introduced into three tubes separately and T1weighted-spin echo(T1w-SE)and T2w-SE images were acquired on a 1.5T MR scanner.In the second experiment,OA and PO were injected into left coronary artery(LCA)and left ventricle(LV)of ex situ bovine hearts and their T1w-SE,T2w-SE,T,w-multipoint Dixon(T1w-mDixon)and 3DT2w-mDixon images were acquired.The overall results indicate that OA may have a potential to be used as a dual(T,and T2 based)contrast agent for PMMRA when proper sequence parameters are utilized.However,as the pilot study was based on limited number of animal hearts,more researches using OA in cadavers are needed to validate our findings.
其他文献
Improvements in the diagnosis and treatment of cancer are urgently needed for use in nanotechnology.Nanoparticles(NPs)can reduce the side effects of traditional chemotherapy by sustained release of loaded drugs and increase therapeutic efficiency.NPs can
采用增重法分析了309SMOD奥氏体不锈钢板材在不同温度下的氧化行为,获得了该钢高温氧化的抛物线动力学曲线,利用SEM、EDS及XRD对氧化物的形貌和物相进行了分析.结果表明,800℃氧化物形貌为板状和块状,900℃、1000℃的氧化物主要为尖晶石颗粒.309SMOD奥氏体不锈钢表面由于高温氧化生成具有3层结构的混合氧化物膜,最外层结构为MnCr2 O4和FeCr2 O4,次外层结构的氧化物为Cr2 O3,最内层结构的氧化物为SiO2,这种结构的氧化膜使得309SMOD奥氏体不锈钢具有良好的抗高温氧化性能
Age-related macular degeneration (AMD) is the most common cause of irreversible blindness and visual impairment in individuals over the age of 50 years in western societies.More than 25 million people currently suffer from this illness in the world,with a
利用Gleeble-3500热模拟试验机对锻造态316LN不锈钢进行了等温热压缩试验,研究了应变速率为0.001～1 s-1、变形温度为1223～1523 K、压缩变形量为65％条件下材料的高温流变行为,建立了流变应力本构模型,并将其应用于Deform-3D软件平台,通过导入新材料数据,考虑界面摩擦等尺寸仿真了热模拟试验结果.结果表明:相同应变速率下,随着变形温度升高,316LN奥氏体不锈钢的压缩应力逐渐减小;相同变形温度下,随着应变速率增加,材料的压缩应力逐渐增大;且在真应力-真应变曲线中,随应变量增大
为了制备超10 t级G115马氏体耐热钢的大型铸件,需科学评估合金元素对析出行为的影响.采用Thermo-Calc软件的TCFe9数据库对G115马氏体耐热钢的平衡析出相进行热力学模拟计算,研究了主元素对G115钢平衡态析出相类型、析出量和析出温度的影响.计算结果表明:G115马氏体耐热钢在650℃下的析出相主要有MX相(FCC-A1#2:NbC)、M23C6、Laves相和富Cu相.其中NbC的析出温度为1148℃,M23 C6的析出温度为871℃,Laves相的析出温度为811℃,富Cu相的析出温度为
ZL114A合金是我国自主研发的铸造亚共晶Al-Si合金,变质共晶Si是提高其室温综合拉伸性能的重要方法之一.利用室温拉伸试验、扫描电镜观察研究了Sb元素对金属型铸造条件下ZL114A合金铸态和热处理态组织以及性能的影响.结果表明,对于铸态的ZL114A合金,Sb的加入将共晶Si由板片状变质为纤维状或颗粒状;经过热处理的ZL114A合金,Sb的加入使共晶Si的长径比变小,球化程度更高.在金属型铸造条件下,Sb元素能够提高ZL114A合金铸态和热处理态的室温综合拉伸性能,热处理后添加Sb的合金的抗拉强度和伸
利用OM、SEM、TEM及物理化学相等方法研究了时效温度变化对直接淬火Ni-Cr-Mo-V-Cu低合金钢组织及力学性能的影响,同时在具有最佳强韧性匹配的时效态试样中建立了屈服强度模型.Ni-Cr-Mo-V-Cu钢的直接淬火组织为马氏体和少量贝氏体组成的混合组织.直接淬火Ni-Cr-Mo-V-Cu钢在400～600℃范围内的不同温度时效处理后,其强度及维氏硬度表现出典型的欠时效阶段、峰时效阶段及过时效阶段.试验钢位错回复程度、MC及富铜粒子的析出、bcc铁基体中固溶元素的脱溶等因素随时效温度的变化是时效态试
The contamination status of H5 avian influenza viruses and distribution of subtypes of H5N1 and H5N6 in poultry-related environment of Hubei areas were investigated.Urban and rural live poultry markets,poultry farms,intensive livestock farms and other mon
利用DIL805A热膨胀仪记录了铸态GCr15钢在不同的加热速率下(0.5、3、5、30、100℃/s)的线膨胀量,获得了不同加热速率下的热膨胀曲线和奥氏体体积转变分数曲线,研究了加热速率对奥氏体化的影响.采用高温光学显微镜对该钢在连续加热过程中的奥氏体转变过程进行了观察分析.研究表明:GC15钢在连续加热过程中的奥氏体转变可分为3个阶段:在760～790℃为珠光体向奥氏体的转变、(Fe,Cr)3CII向奥氏体中的溶解和奥氏体的成分均匀化温度分别为790～890℃及890℃以上.并且随着加热速率提高,相变
Although the advent of tyrosine kinase inhibitors (TKIs) has dramatically improved the survival of patients with chronic myeloid leukaemia (CML),acquired drug resistance and TKI-insensitive leukaemic stem cells (LSCs) remain major obstacles to a CML cure.