In situ preparation of g-C3N4/polyaniline hybrid composites with enhanced visible-light photocatalyt

来源 :环境科学学报(英文版) | 被引量 : 0次 | 上传用户:abo000
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The graphic carbon nitride/polyaniline(g-C3N4/PANI)hybrid composites were successfully synthesized by a facile in situ polymerization process under ice water bath.The photo-catalytic activities of the g-C3N4/PANI composites were evaluated by using oxytetracycline(OTC)as model pollutants.The optimal g-C3N4/PANI composite(5%PANI:the g-C3N4/PANI hybrid with 5 wt.%of PANI)showed an enhancement degradation rate of 5-fold compared to that of conventional g-C3N4 under simulated-sunlight irradiation.In addition,the 5%PANI demonstrate significantly photocatalytic evolution H2 rate(163.2 μmol/(g-hr))under the vis-ible light irradiation.Furthermore,based on the results of optical performance and electro-chemical testing,a possible mechanism was proposed,indicating that the incorporation of PANI into the traditional g-C3N4 can effectively tune the electronic structures,improve the photo-generated electrons-holes separation and enhance extensive absorption of visi-ble light.Such a g-C3N4/PANI hybrid nanocomposites could be envisaged to possess great potentials in practical wastewater treatment and water splitting.
其他文献
High values of ozone(O3)occur frequently in the dry spring season;thus,understanding The evolution characteristics of volatile organic compounds(VOCs)in spring
The Yongding New River is essential for the water supplies of Tianjin.To date,there is no comprehensive report that assesses the year-round water quality of the
针对某3300 t多用途船在试航过程中出现螺旋桨设计不当、机桨不匹配的问题,基于CFD计算的方法对其船体水动力性能进行分析,提出了3项补救措施:修桨、加装整流鳍、加装舵球。改进后的试航结果表明:主机转速提升了近10%,达到其额定转速;船舶航速提升了1.6 kn;艉部振动问题得到明显的改善。
Using a bottom-up estimation method,a comprehensive,high-resolution emission inven-tory of gaseous and particulate atmospheric pollutants for multiple anthropog
利用ANSYS Workbench软件通过热-固耦合的方法对T型板结构的焊接过程进行模拟,获得不同应力边界条件下焊接残余应力及变形;然后将残余应力和变形分别添加到力学模型中,同时施加位移载荷研究具有焊接初始缺陷的T型板结构压缩极限强度。结果表明:在焊缝及热影响区存在着较大的拉伸应力,T型面板呈现角变形状态;在分别添加焊接残余应力和变形情况下,T型板极限强度都有下降,焊接残余应力对T型板极限强度的影响较焊接变形影响大。
为了解决集装箱船绑扎桥卧式总组占用大量施工场地的问题,以9400 TEU集装箱船为研究对象,提出了绑扎桥立式总组的方案。首先从分段划分、堆场压力等方面对该方案的可行性进行了分析,然后讨论了立式总组技术的具体做法和特点,最后从场地占用情况、变形情况等方面将新型立式总组与卧式总组的成效进行对比。研究结果表明:立式总组技术使总组效率提高了约20%,能减少约80%总组场地的占用,有效提高了大型集装箱船的建造效率。
为了实时监测钢悬链线立管关键位置的运动、应变,对深水钢悬链线立管(SCR)实时监测预警系统进行研究。该系统主要包括数据处理中心的开发及水下传感器的研制,能够在运营期有效评估其疲劳寿命及剩余强度,进而及时预警其运营风险,指导现场操作人员的检测和维修,有助于深水SCR监测预警系统的国产化。
Sodium hypochlorite(NaClO)is a commonly applied cleaning agent for ultrafiltration membranes in water and wastewater treatment.Long-term exposure to NaClO might change the properties and performance of polymeric membranes,and ultimately shorten membrane l
为了减少船舶碰撞事故的发生、提高碰撞事故调查工作效率,分析了当事两船最近会遇距离变化判断内河船舶碰撞过程的不同阶段特点,阐述了法规中两船处在会遇局面下的避让行动要求和不同阶段时的责任关系;最后从碰撞发生后提出对过程的调查方法,确定了在事故经过分析中以局面形成和因果关系为原则的观点。
以KP505螺旋桨为研究对象,利用CFD软件,基于RANS方法结合Realizable k-ε湍流模型开展螺旋桨水动力性能数值模拟,分析不同螺距、拱度径向分布对其水动力性能的影响。结果表明:随着螺距、拱度增大,推力和转矩均明显增加,导致螺旋桨单位面积平均推力增大,使得螺旋桨更易产生空泡现象;在中、低进速系数下,螺距越小,敞水效率越高;随拱度的增大敞水效率无明显变化。