我厂五车间,在进行CZ—2c第七发后箱最后清理时.检验员崔远光同志做总检查,在检查到前底溢出管支撑角片与底连接处,发现约1.5×2×0.2mm(实测重为0.0025g)的钢片端头崩断,当即报告了领导。厂、院领导都非常重视,要求认真细致的查找。特别是具体承担任务的冶金科领导和四号X光 At the fifth workshop of our factory, during the final clean-up of the CZ-2c seventh generation back box, inspector Cui Yuanguang made a general inspection. After checking the front bottom overflow tube support angle piece and the bottom connection, it was found that the size was about 1.5×2×0.2 mm. The measured end of the steel sheet collapsed at 0.0025 g and immediately reported the leadership. The leaders of the factory and the hospital attach great importance and require careful and detailed search. In particular, the metallurgical leaders responsible for the specific tasks and the X-rays on the 4th