论文部分内容阅读
集中控制,顾名思义,就是将多台生产设备的动力控制予以集中。对一个车间或者一个工厂的集中控制,其实就是一种遥控。因为一般是以线或管制导,采用电动或气动的方式来实现信息传递和完成执行机构的动作,所以都称作集中控制,以与无线制导的控制相区别。 集中控制的方法,有开环或闭环控制,监督或直接控制等。无论那种方式,在中心控制室内,起码都具备有各种主令开关,各种灯光指示和/或显示仪表。例如常见的配电房的配电柜,大机床的控制柜等就是一种基本的集中控制的示例。在工业发达的今天,集中控制除了作一般的开关控制外,通过模拟显示屏,它还能十分形象和直观地计量显示并定时
Centralized control, as its name implies, is the centralized control of the power of multiple production equipment. The centralized control of a shop or a factory is actually a type of remote control. It is called centralized control because it is usually guided by a wire or a tube and adopts the electric or pneumatic means to transmit information and complete the actuator’s action. Therefore, it is distinguished from the wireless guided control. The method of centralized control has open-loop or closed-loop control, supervision or direct control. Either way, at least in the central control room are equipped with a variety of master switch, a variety of light instructions and / or display instruments. For example, a common power distribution room distribution cabinet, large machine control cabinet, etc. is a basic example of centralized control. In today’s industrially developed, centralized control, in addition to making general switching control, through the analog display, it can also be very vivid and intuitive measurement and timing display