In the 20CrMnTi steel production process, the nitrogen content increased by 19 × 10-6 and 29 × 10-6, respectively, during ladle furnace(LF) refining and durin
A mathematical model has been presented to study the combustion of a single copper concentrate particle with high moisture con-tent. By using the presented mode
The microstructures and properties of hot-rolled low-carbon ferritic steel have been investigated by optical microscopy, field-emission scanning electron micros
Low-carbon steel sheets DC04 used in the automotive industry were subjected to cold rolling for thickness reduction from 20%to 89%. The desired thickness was ac
Tensile fatigue tests were designed to study the relation between the tangential magnetic memory signal and dislocations. According to experimental results, in
The 00Cr13Ni5Mo2 supermartensitic stainless steel was first tempered at 570-730°C for 2 h to observe the microstructure and hardness changes. The tempering tem
This paper describes the synthesis of Al7075 metal matrix composites reinforced with SiC, and the characterization of their microstructure and mechanical behavi
The effects of Al-P addition on the microstructure and mechanical properties of as-cast Mg–5%Sn–1.25%Si magnesium alloy were investigated. The results show th
Micro/nano magnesium carbonate pentahydrate(MgCO3 ·5H2 O) with flower-like morphology was synthesized using magnesite as a substrate and potassium dihydrogen p