As a light wave-guide component for transmitting ultraviolet (UV) laser pulses, pure silica core UV fibre probes have attracted a great deal of attention in the near-field optical data storage and bio-medical studies. We fabricate UV fibre probes with tips in dimension of about 2-5μm and taper angle 16° by the tube etching method, using 40% HF acid as etching solution and xylene as overlayer. Probes produced have curvy configuration with smooth surface. The yield of fine probes is rather high and etching operation greatly simplified. With higher damage threshold, pure silica core multimode UV fibre probes can be coupled into more laser power. In addition, using UV light reduces the cutoff wavelength of the fibre probes, which is in favour of increasing the transmission efficiency of the probe. Furthermore, the larger tip dimension helps to enhance the light throughput either. The advances of fabrication technique of UV optical fibre probe may further support the studies of UV light data storage, pulsed laser biosurgery and UV photolithography.