隔水管非线性振动的线性化分析

来源 :华东石油学院学报(自然科学版) | 被引量 : 0次 | 上传用户:b56240320
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
本文在规则波浪与海流联合作用下对海洋钻井隔水管进行了动力分析,对非线性拖曳力采用改进的线性化方法,推导了有限元线性振动方程。求解这些方程几乎象静力方程一样,只需要少数几次迭代就可求得响应最大值。同时给出一些规则波浪与海流联合作用下的算例,并对由本文方法和由非线性时间域动力分析方法分别求得的两种结果进行了比较。比较表明,两种计算结果吻合。本文的线性化方法及把动力方程变换为静力方程的方法,能节约计算机时。隔水管是海洋工程中较典型的构件,该分析方法便于实际应用。 In this paper, the dynamic analysis of marine drilling riser under the combined effect of regular wave and ocean current is carried out. The nonlinear linear drag of nonlinear drag force is derived and the linear vibration equation of finite element is deduced. Solving these equations is almost like static equations, requiring only a few iterations to find the response maximum. At the same time, some examples under the combined action of regular wave and ocean current are given, and the two results respectively obtained by this method and the nonlinear time domain dynamic analysis method are compared. The comparison shows that the two results are in good agreement. The linearization method in this paper and the method of transforming dynamic equations into static equations can save computer time. The riser is a typical component of marine engineering, and the method of analysis is convenient for practical application.
其他文献
波形钢腹板钢管混凝土结构是一种将波形钢腹板与钢管混凝土结构结合而成的新型组合结构,它充分利用了波形钢板抗剪强度高及钢管混凝土抗压强度高的优点。本文将该结构应用于
用薄层和半无限扩散紫外—可见光谱法研究了铂片对溶液中苯胺类化合物的催化现象,测定了铂催化对氨基苯酚氧化反应及其随后不可逆均相水解反应的速率常数,实验结果表明:铂催化对
提出一种能增加硬化层厚度的渗氮钢低温淬火技术,研究了硬化层的组织、渗氮温度和加热时间对20CrMnTi钢的硬化层厚度的影响.实验结果表明,硬化层是由化合物层和马氏体层组成,
安威主要做肝脏生理学分子水平的研究。提到他自己为什么要从事这一领域的研究,安威的回答很有趣:有一次他拿到一本分子生物学的书,翻开一看,百分之八十看不懂,他就觉得这一
A flextensional transducer with an Omega shape and its algorithmic method of the resonant frequency and the shape functions are suggested.The Omega transducer i
大动脉炎儿童的EEG、BEAM、REG1例报告孔峰,藏玉萍,贾安山1病例报告患儿杨某某,女,8岁。1994年3月17日以周围性面神经麻痹、上感入院。体查:T37.9℃,神清,左侧眼裂增宽,闭合不全,左鼻唇沟变浅,口角向右歪斜,伸舌居
地下经济活动是世界各国的共同现象。而且有足够的证据表明其呈日益增长之势。许多国家试图通过各种各样的惩罚措施或者教育,而不是通过改革提高其官方经济活力的税收和社会
本文对比研究了镍磷镀层、镍钨磷镀层及非晶态镍磷和镍钨磷双层组合镀层的耐蚀性能,分别进行了各种镀层的浸渍腐蚀实验、镀层的X射线衍射图象、镀层的扫描电镜图象、以及在工厂
合理的润滑能大幅度降低设备运转部件的磨损,减小动能的消耗,保证设备的精度和延长其寿命,从而更充分发挥设备的效能。采用二硫化钼新型固体润滑材料不仅能达到以上目的,而