1.用195型柴油机做动力的脱粒机 (1)首先制作一个宽与脱粒机底架宽度相同、长5m的板车底盘,前面用长1.2m、直径45mm的钢管做把手。 (2)将脱粒机的4个轮子卸去,轮轴固定在板车架后端。用15mm钢板焊制两个挂钩,焊在靠近脱粒机前部底盘上方,用以装板车轮轴。 (3)柴油机装在距脱粒机约2m处,这样可以保证机器在转移时前后平衡。固定柴油机的4个地 1. Thresher powered by Model 195 diesel engine (1) First, make a flatbed chassis with a width of 5m and the same width as the chassis of the thresher. The front is made of steel pipe with a length of 1.2m and a diameter of 45mm. (2) Remove the 4 wheels of the thresher, the axle is fixed on the back of the plate frame. Two hooks are welded using a 15mm steel plate and welded to the top of the chassis near the front of the thresher for fitting the wheel axle of the plate. (3) The diesel engine is installed about 2m away from the thresher so that the machine can be balanced before and after the transfer. Fixed 4 diesel engines