核燃料后处理放化实验设施首次真实乏燃料元件的溶解

来源 :中国原子能科学研究院年报 | 被引量 : 0次 | 上传用户:talygs
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
中国原子能科学研究院核燃料后处理放化实验设施首次真实乏燃料溶解实验在31室、33室、核燃料后处理放化实验设施运行部的共同合作下顺利完成。实验从2015年9月22日开始,至9月27日结束,共历时6天完成了两批共10根101堆乏燃料元件棒的溶解,制备出预期浓度的1AF料液13L。在溶解过程中称量了相关的质量,数据列于 The first real spent fuel dissolution experiment at the nuclear fuel reprocessing and radiochemical experimental facilities of China Institute of Atomic Energy completed successfully under the joint operation of Operation Department 31 and Room 33 and the Nuclear Fuel Post-treatment and Radiation Experimental Facilities. Experiments began on September 22, 2015 and ended on September 27, completing the lysis of 10 101 spent spent fuel rods in 6 batches over a period of 6 days to prepare 13 L of 1AF stock solution of the desired concentration. The relevant quality was weighed during the dissolution process and the data is listed
其他文献
溴化铊具有宽的禁带、高密度、高原子序数的特点,是一种很有前途的用来制备室温辐射探测器的材料。在安全检测、成像、辐射防护等领域具有巨大的潜在应用市场。溴化铊探测器
Main pipeline is the key component of nuclear power plants(NPPs).Under the first loop water and low-cyclic load condition,the main pipeline may be induced to co
先进无盐二循环流程是我院开发20多年的乏燃料后处理流程。其中的铀净化循环的主要任务是对来自一循环的铀产品(1CU)作进一步纯化,以除去少量钚、镎和钌、锝等裂变产物元素,
重铀酸盐是核燃料循环的重要原料,对杂质含量要求严格,其中二氧化硅的含量是检验产品是否合格的一项重要指标。本工作采用硅钼蓝分光光度法对重铀酸盐中二氧化硅含量进行了测
请下载后查看,本文暂不支持在线获取查看简介。 Please download to view, this article does not support online access to view profile.
开展了先进无盐后处理钚纯化循环工艺流程热试验验证和优化研究。钚纯化循环热试验中,首先将来自共去污循环1BP料液经N_2O_4氧化、酸度调节制成2AF料液。2AF料液历经2A(萃取)
Seven fuel rods failure happened in the 6reactor units in Daya Bay NPP during 2003and2012.In order to eliminate the public panic,raise the operation level to ac
核燃料组件是反应堆中的核心部件,核燃料组件在反应堆复杂环境条件下安全有效运转是核设施安全的有效保障,为了更好地研究和分析核燃料组件在反应堆运行期间堆内行为的完整信
China has introduced two WWER-1000/428nuclear power units from Russia at present,each unit includes four PGV-1000M horizontal steam generators.According to the
Qinshan PhaseⅠNPP is a first domestic commercial PWR and its fuel rods and fuel assembly were designed and manufactured by China.In order to assess the irradia