Dry reforming of methane on active and coke resistant Ni/Y2Zr2O7 catalysts treated by dielectric bar

来源 :能源化学 | 被引量 : 0次 | 上传用户:caful
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
In this study,Ni/Y2Zr2O7 catalysts prepared with impregnation method and treated by dielectric barrier discharge plasma (DBD) in different atmospheres have been investigated for methane dry reforming.It is revealed by H2-TPR that plasma treatment can enhance the interaction between NiO/Ni particles and the Y2Zr2O7 pymchlore support.Therefore,catalysts with smaller NiO and Ni grains sizes,higher metallic Ni active surface areas can be achieved,as evidenced by XRD,TEM and H2 adsorption-desorption measurements.As a consequence,the plasma-treated catalysts show significantly improved activity,stability and coke resistance,as testified by the TEM and TGA-DSC results.Plasma treatment in H2/Ar gas mixture is found to be the best condition to prepare Ni/Y2Zr2O7,which can be used to obtain a catalyst with the highest activity,stability and most potent coke resistance.It is believed that the smaller Ni grain size and higher metallic Ni active surface area induced by plasma treatment are the inherent reasons accounting for the promoted reaction performance of the Ni/Y2Zr2O7 pymchlore catalysts.
其他文献
Dye-sensitized photoelectrochemical cell (DS-PEC) is an especially attractive method to generate hydrogen via visible light driven water splitting.Electrolyte,an essential component of DS-PEC,plays a great role in determining the photoactivities of device
Lithium-sulfur (Li-S) batteries are great candidates for energy storage systems,but need to overcome the issues of low sulfur utilization and polysulfide shuttling for use in large-scale commercial applications.Recently,quaternized polymers have received
The transition of the current energy infrastructure from fossil fuels to renewable energy sources is critical to the continuous prosperity of our society and economy.In order to accelerate the extensive adoption of the sustainable energy sources,challenge
期刊
The influence of tris(trimethylsilyl) borate (TMSB) as an electrolyte additive on lithium ion cells have been studied using Li/LiCo1/3Ni1/3Mn1/3O2 cells at a higher voltage,4.7V versus Li/Li+.1 wt% TMSB can dramatically reduce the capacity fading that occ
A series of biopolymer based complex were manufactured by coordinating iron ions to the abundant amino-and sulfur-containing groups in the modified wool and used as heterogeneous Fenton-like photocatalyst for 4-chlorophenol (4-CP) degradation in the prese
The new V-MCM-41 molecular sieves with good ordered hexagonal mesoporous structure and crystallinity were synthesized through in-situ hydrothermal preparation method.The effects of the crystallization time were discussed.The synthesized samples were chara
The potential application of electrochemically formed copper sulfide as horseradish peroxidase mediator in the enzymatic biofuel cell and anthraquinone AV109 dye as a fuel is investigated.The open circuit voltage of 0.52 V and short circuit current of ~3.
PtRu/SnO2/C catalyst was prepared in a polyol process,followed by reduction treatment and alkaline etching.X-ray diffraction,transmission electron microscope with energy dispersive spectrometer and Xray photoelectron spectroscopy were used to characterize
Direct ethanol fuel cells have attracted attention as an alternative energy technology due to several advantages such as high theoretical energy density and abundant supply of ethanol.In spite of the advantages,commercialization of direct ethanol fuel cei
Current study reports a rapid one-pot non-hydrolytic condition in the synthesis of SnO2 QDs nanopowder using tin (Ⅱ) stearate (Sn(St)2) as environmentally-benign organometallic precursor,which is an unprecedentedly employed-compound in preceding SnO2 nano