论文部分内容阅读
一种陶瓷金属结构的充氢二极管的研制结果表明。该管能承受33千伏反向电压,平均电流1.5安培,脉冲电流可达150安培以上,点火电压不大于2千伏,脉冲管压降在80伏左右。该管是为脉冲调制器上的削波电路(消除脉冲形成线上的反电压)而设计的,估计亦可用于整流或充电电路。该管使用傍热式氧化物阴极,当脉冲调制器负载打火时,通过管子的脉冲电流超过额定值的好几倍,这种短时间过载不会使管子捐坏。整管高180毫米,直径120毫米。全管系金属陶瓷结构,具有耐震、耐冲击等优良性
A ceramic metal structure of the hydrogen charging diode results show. The tube can withstand 33 kV reverse voltage, the average current of 1.5 amperes, pulse current up to 150 amperes, the ignition voltage is not more than 2 kV, pulse tube pressure drop of about 80 volts. The tube is designed for a chopper circuit on a pulse modulator that eliminates the formation of a line-to-line voltage on a pulse and can also be used for rectification or charging circuits. This tube uses a pyroelectric oxide cathode. When the pulse modulator is pulsed with a load, the pulsed current through the tube exceeds several times the rated value. This short time overload will not cause the tube to be donated. The whole pipe height 180 mm, diameter 120 mm. Duct metal ceramic structure, with seismic, impact resistance and other fine