【摘 要】
：
Nanoparticle reinforced nickel matrix composite coatings, such as n-Al2O3/Ni, n-SiO2/Ni, n-SiC/Ni and n-TiO2/Ni, were fabricated by brush plating technique. Har
【机 构】
：
National Key Laboratory for Remanufacturing
论文部分内容阅读
Nanoparticle reinforced nickel matrix composite coatings, such as n-Al2O3/Ni, n-SiO2/Ni, n-SiC/Ni and n-TiO2/Ni, were fabricated by brush plating technique. Hardness, wear resistance and contact-fatigue resistance of the composite coatings were determined, and strengthening mechanism of the composite coatings was discussed. Results show that the composite coatings have superior properties to the Ni metal coating. Compared with properties of brush plated Ni metal coating, the composite coatings have hardness over 1.5 times and wear resistance capability of about 2.5 times. The strengthening mechanism of the composite coatings mainly includes fine-crystal grain effect, nanoparticle dispersion effect and dislocation effect.
其他文献
TiC/TiAl composites with different TiC content were fabricated by rapid heating technique ofspark plasma sintering (SPS). The effect of TiC particles on microst
The continuous cooling transformation (CCT) diagrams of 86CrMoV7 steel samples including hot deformed and not hot deformed were constructed by dilatometry, meta
The influence of dispersants and decentralization condition on rheological properties and gelcasting of BNA12O3-Y2 O3 slurry was discussed, and the thermodynami
By means of surface mechanical attrition (SMA), a nanostructured surface layer was formed on a 0Cr18Ni9Ti austenite stainless steel plate. A strain-induced mart
The multilayer gradient CrN/ZrN coatings were synthesized by a dual cathode DC magnetron sputtering.The influence of different species of reaction gases and par
Through eliminating voids not affecting the primary bonding process, and incorporating interlayer and flexible base material, the interface geometry character a
Fe-Al/WC intermetallic composite coatings were prepared by high velocity arc spraying (HVAS) technology on 20G steel and the oxidation performance of Fe-Al/WC c
SiCp/Sialon ceramic manix composites were fabricated by pressureless sintering method using the Sialon powder synthesized from the kaolin clay and submicron SiC
The effect of addition of A1 on crystal structure microtexture and magnetostrictioncoefficient in Tb0.3Dy0.7Fe1.95 alloy were studied.The results show that addi
Modified sensing membranes based on fluorescence quenching were prepared by the sol-gel meth-od, using formamide as the drying control chemical additive, tetrae