【摘 要】
:
The sustainability of biomass use as a primary energy source depends on the efficiency of its conversion processes.The key contributing factors are well understood,owing to extensive experimental and theoretical modeling efforts in literature.In this manu
【机 构】
:
InstitutefortheDevelopmentofEnergyforAfricanSustainability(IDEAS),DepartmentofChemistry,CollegeofChe
【基金项目】
:
The authors would like to acknowledge the financial support from University of South Africa,Hebei University of Science and Technology and South Africa National Research Foundation(113648).
论文部分内容阅读
The sustainability of biomass use as a primary energy source depends on the efficiency of its conversion processes.The key contributing factors are well understood,owing to extensive experimental and theoretical modeling efforts in literature.In this manu
其他文献
The rising production of produced water from oilfields had been proven to bring detrimental environmental effects.In this study,an efficient,recyclable,and environmental-friendly reduced graphene oxide immobilizedκ-Carrageenan hydrogel composite(κCaGO)was
LiNi0.8Co0.15Al0.05O2 (NCA)@Cr2O5 composite electrode combines the high rate-capability characteristics of NCA with the stability of Cr2O5, playing a synergisti
针对制钙工序产量下降,查找主要影响因素,经过多次技术改造,实现产量提高,蒸汽耗量下降的目标。
Different preparation routes for TiO2-supported natural and synthetic clinoptilolite (TiO2/CP) composites were thoroughly investigated on the basis of sol–gel,
潮流计算是电力系统最基本最常用的计算。主要针对系统给定的运行条件,求得各元件流过的功率,进行提高发电和输电效率的研究。本文采用牛顿-拉夫逊原理,基于MATLAB计算机仿真软件进行潮流计算。通过计算,求得每一条线路、每一条母线所分得的功率是多少。因此本文的研究对于电力系统的安全运营与维护具有重要参考意义。
我国硫酸钾的生产大部分为曼海姆法,该工艺会产生大量混酸,在现在环保要求日益趋紧的情况下,如何环保安全的利用,成为摆在我们面前的难题。我公司充分利用现有的工艺设备,充分吸收利用了其中的有效成分-盐酸,并且只产生一般固体废弃物,从而达到环保利用的结果。
Mg2(Si,Sn)合金是一种受到广泛关注的中温区热电材料,具有成本低廉、环境友好等优点.Mg2(Si,Sn)材料研究中非常重要的一环在于如何实现对Mg元素的精准控制,采用低温固相反应
本研究通过脱合金化和化学气相沉积相结合的方法,以纳米多孔铜为基底,制备了三维石墨烯/铜基复合材料。该复合材料电导率在93.5%IACS的情况下,硬度和抗拉强度分别达到55.2 HV和330 MPa。相较于一般的铜基复合材料,原位合成制备的石墨烯不仅可在多孔铜基体内三维连续分布铺展生长,而且高质量生长并且均匀分散的薄层石墨烯对复合材料的物理与机械性能增强起到重要作用。为石墨烯/金属基复合材料研究提供了新思路。
通过改变纳米CaCO3的不同掺入方式和掺量对钙基地聚合物进行改性,分析改性后钙基地聚合物的抗压强度和弹性模量,并采用扫描电镜(SEM)揭示纳米CaCO3对钙基地聚合物力学性能及微观结构的影响。结果表明:适量的纳米CaCO3可以提高钙基地聚合物7 d和28 d的抗压强度和弹性模量。两种掺入方式的纳米CaCO3最佳掺量均为胶凝材料粉体总质量的2%,且纳米CaCO3作为添加物时改性效果更佳;纳米CaCO
Incorporating of hydrous ferric oxide (HFO) inside porous supports with large sizes has become an effec-tive way to decontaminate the water from heavy metals. U