一、电炉丝断丝快速维修法在热处理车间中,电炉丝断丝是常有的事。在通常情况下,由于炉膛内的温度很高需等2～3天,待炉内温度冷却下来后,才能进炉拆下电阻丝焊接,给生产造成较大影响,而且电阻丝拆下装上很费工时。现可取一段与原电炉丝一样的螺旋状旧电炉丝,用长钳或铁叉将其塞进断丝处,把断丝的两端联结起来,就可通电升温。这种方法快速简便,不影响生产,工效 First, the electric wire broken wire rapid repair method In the heat treatment plant, electric wire broken wire is a common occurrence. Under normal circumstances, due to the high temperature in the furnace to wait 2 to 3 days until the furnace temperature cooled down after the furnace can remove the resistance wire welding, to produce a greater impact, and the resistance wire removed It is labor-intensive. It is desirable to take a piece of the same old electric furnace wire spiral old wire, with a long pliers or iron fork into the broken wire at the ends of the broken wire can be connected, you can power up. This method is quick and easy, does not affect the production, ergonomics