论文部分内容阅读
本装置用于控制轧制、控制冷却模拟试验和为工厂建立轧后控制冷却装备提供工艺参数和设计依据。采用气-水喷雾冷却方式,上、下双面冷却,冷却均匀,节省耗水量,冷却速率可调范围广(从风冷到50℃/s以上),上部冷却和下部冷却分开控制,可随意调节上、下水量比,冷却后板形良好。气水比随意可调,可精细调节冷却速率,冷却速率控制精度为±2℃/s。装有气压、水压、气量、水量的控制调节和自动记录仪表。只需一人就可在操纵台上进行全部调节控制和操作。
The device is used for controlling rolling, controlling cooling simulation test and providing process parameters and design basis for establishing post-rolling control cooling equipment in the factory. Adopting air-water spray cooling method, the upper and lower double-sided cooling, cooling uniform, saving water consumption, wide adjustable cooling rate (from air-cooled to above 50 ℃ / s), the upper cooling and the lower cooling separately control, free Adjust the water ratio, cooling plate shape is good. Air-water ratio is adjustable, the cooling rate can be finely adjusted, the cooling rate control accuracy of ± 2 ℃ / s. Equipped with pressure, water pressure, gas volume, water control and automatic recording meter. Only one person can control all the adjustments and operations on the console.